fume hood
英 [fjuːm hʊd]
美 [fjuːm hʊd]
通风橱；烟柜
双语例句
- Design of a new full closed fume hood for EAF and its application
炼钢电弧炉新型全密闭烟罩的设计与应用 - Worktop: Chosen by customer Cabinet: Outline boarders of fume hood adopt American Wilsonart fireproofing veneer and laminate Dew River melamine chipboard.
台面板：材料可由用户选用。柜体：采用美国威盛亚防火板贴面压贴露水河三聚氰氨板组成通风柜外框。 - There should be water pipe and water sink in fume hood.
通风橱内宜要有水管，水槽。 - Fuel vapors can escape from the carburetor float bowl through external vents, internal vents and fuel passages and air bleeds. The switches and power sockets for fume hoods shall be placed on the outside of the fume hood.
燃料蒸汽可以从化油器浮子室通过外部通风口，内部通风口，燃料通道和空气泄放口逸散出去。所有的开关和插座都需安装在通风柜外部。 - Fume hood should be provided in each regular chemical analysis laboratory.
每个常规化学分析室都要有通风橱。 - Plan view drawing of laboratory layout with caseworks and fume hood arrangement.
实验室基本柜体、通风柜平面布置图。 - The laboratory exhaust system includes exhaust duct works, exhaust fan, laboratory fume hood exhaust, laboratory canopy hood and cabinets needed venting.
实验室排气系统包括排气管路、气风机、验室通风柜管道、验室排风罩和特殊存储柜的排气管道。 - Exterior Light Fixture: Fluorescent lights are mounted outside the fume hood chamber for improved safety, increased operating life and convenient service.
外部电灯组件：荧光灯安装于通风柜室外部，以提高安全，增加操作寿命以及方便服务。 - Each Fume Hood will be equipped with one cold water faucet and maximum to seven various gas faucet according to laboratory specialists'requirement.
每一个通风柜标准配置为一个冷水龙头，此外根据实验室专家要求可以配置最多7个不同的气体龙头。 - Solenoid operated spoiler Baffles: Baffles providing controlled air vectors into and through the fume hood shall be constructed from the same material as the liner.
电螺管控制的扰流片扰流板：扰流板应该和内衬材料一致，其引导通风柜气体排除柜外。 - The pump exhaust should lead to the open air or a fume hood. Exhaust vaporous wastes through a pipe.
抽气泵的排气管应该导向室外空旷处或导向一座通风橱。 - The switches and power sockets for fume hoods shall be placed on the outside of the fume hood.
所有的开关和插座都需安装在通风柜外部。 - Fume hood shall be designed to minimize static pressure loss. Bell shaped exhaust collar configuration shall be provided.
通风柜的设计要减少静压损失。因此一般在排气口附件采用钟型设计。 - The pipe of fume hood should upward through the roof. There should be water pipe and water sink in the fume hood.
通风柜，通风橱的管道要通到屋顶，通风橱内要有水管，水槽。 - The Control of Face Velocity of VAV Fume Hood in Modern Laboratory
现代实验室变风量排风柜罩面风速的控制 - Analysis is made on the burst of the removable fume hood tube of the converter and results show that the burst occurs due to running at high temperature and thus counter measures are put forward accordingly.
对转炉移动烟罩管爆裂进行了分析，结果表明，其爆裂是由于超温运行所致，对此提出了预防措施。 - Influence of Air Supply to the Laboratory Fume Hood Air Flow Control
送风对实验室排风柜气流控制的影响 - As the in common use cooking oil fume control measure, the mechanical ventilation which utilizes the kitchen exhaust hood or exhaust fan as dynamical facility has been widely used in residential kitchen.
作为常用的油烟控制手段，采用排油烟机或排风扇的机械通风方式被广泛的应用于居民厨房，本文将排油烟机作为研究对象，分析其油烟控制性能。 - In this paper, the fume exhaust volume of dust-removal system in the electrical furnace has been calculated by adopting velocity control method, and the fume exhaust hood has been designed to meet optimum collecting effects under the condition of the most economical fume exhaust volume.
通过应用控制速度法的理论计算电炉除尘系统的排烟量，并进行除尘罩设计，力求用最经济的排烟量达到最佳的捕集效果。 - The hatch area changes with the fume hood door operation, the face velocity has a big change, the ventilating system can not reach the design request, and affect experiment and ventilating performance.
在实验过程中，随着柜门的操作，通风柜开口面积发生变化，罩面风速变化较大，通风系统达不到设计要求，影响实验和抽风效果。 - Research on the Energy Saving and Safety of Ductless Fume Hood
无管排风柜的节能与安全性研究 - Introduced the configuration, characteristic and test method of the ductless fume hood.
介绍了一种新型的排风柜&无管排风柜的结构、特点以及测试方法，从节能和安全两方向进行分析研究。 - In general, the influence of ceiling makeup air supply style on the capture and contain capability of the wall-mounted oil fume hood is less than the air curtain makeup supply style. The report helps engineers to achieve the optimization of kitchen ventilation system design.
综合比较两种补风方式，天花板顶部补风方式比气幕式补风对排风罩捕获能力的影响较小，这有助于实现商用厨房建筑的最优化通风设计。 - The Design and Use of Laboratory Fume Hood
实验室通风柜的设计和使用 - Lift fan of air cushion vehicle Design and simulation of baffle of fume hood
气垫船垫升风扇通风橱导流板的设计与模拟 - To solve the poor adaptability of fume hood to smoke, the author designs a new type of baffle, and conducts numerical simulation on it by adopting K-ε turbulent flow model and two-phase flow theory.
为解决通风橱对烟气适应能力差的问题，设计了一种导流板.采用K-ε湍流模型，应用两相流理论，对通风橱的流场进行了数值模拟。 - Technical analysis of local fume hood VAV control
通风柜变风量控制的技术分析 - Fume hood is an equipment that contain contamination in the hood and then exhaust it to the outside to keep the safe environment.
排风柜是一种通过排出局部区域产生的污染物，从而维持实验室环境安全的局部排风设备，通过对有害物质的捕集来保护人员安全。 - At first, author describes the construction, conception and operation principle of fume hood.
首先通过对排风柜结构的简要介绍，明确了排风柜的概念和运行原理。